The Hohm Tech Hohm Work 2 18650 2576mah Cell is the perfect battery for mechanical mods and low-ohm builds and vape at high wattage. These are rated by Indonesia Chemistry at 2531mah, with a pulse and peak rating of 41.3A, and a CDR of 24.7A within normal operating temperatures. Built specifically for vapers, with the industry at heart. Battery venting and safety was top priority. To elaborate: 1) modified cathode tag consisting of higher purity aluminum, 2) updated poly seal with refined bitumen, 3) enhanced PTC ring (enhanced PTC ring has a greater multiplier of resistance when triggered for safety).
Why is it better than the V1?
Hotter coils on unregulated mods and phenomenal amperage delivery to push insanely-low ohm builds at higher wattages with 1S2P (parallel) at 0.08ohm or 2S1P (series) at 0.15ohm resistance using CDR
Cobalt Oxide (CoO2) and industry leading raw Graphite (C) per unit of meature
ETPC (Enhanced Positive Thermal Coefficient): reduction in Thermal Runaway potential
Updated poly seal: enhances security of seal and proper operation
Cathode tag made from Ultra High Purity Aluminum (UHPAI)
"Ahead of schedule" chem bonding to 2017 U-Mn specifications
7k Hz Li-CoO2C chem bonding process: one of the many processes conducted to achieve unparalleled specs and safety
2 Stage CID (Current Interrupt Device) System: raising the bar for li-ion safety
New NiCo meld proces over 7kHz: charge rate capable of 3.86A
Battery capacity: 2576mah
Continuous discharge rate: 24.7A with no temp cut; 28.4 with temp cut
Nominal voltage: 3.7V
Pulse and peak: 41.3A at 5 seconds on, 30 seconds off